This tutorial is all about adding character and putting your personal stamp on your bedroom, and the best part is, it can all be completed in just 48 hours, making it the perfect weekend or bank holiday DIY project. It’s especially ideal for those of us juggling busy lives, balancing work, family, and the many day-to-day demands that come with it.
In this tutorial, I’ll show you how to create wall panelling and paint it using Lick PRO Satinwood White paint. I’ll also share some helpful tips and tricks to help you achieve a flawless, professional-looking finish.
Why choose metal packaging for your DIY supplies?
Metal packaging is one of the most sustainable options out there.
- The metal is 100% recyclable
- Metal can be endlessly reusable without degrading
- Metal cans are great for long-term storage and can even be repurposed creatively once empty!
By choosing paint in metal tins such as Lick PRO white satinwood paint which is what I’m using for this tutorial, you’re not only making something beautiful for your home, you’re also making a small but powerful choice for the planet.
So now it’s time for my step-by-step guide tutorial to create a feature wall using panelling and Lick PRO Paint for your home.
Materials and tools you need to complete this DIY job:
- 2 packs of MDF wall kit panelling
- 1 x 2.5 litre tin of Lick PRO satinwood paint
- Mini Roller kit
- Masking tape (low tack)
- 1 x tube of No more nails
- Dust sheets
- 2 x Paint brushes 1.5 inch & 2 inch
- Sandpaper 100 grit
- 1 x tube of Decorators Caulk
- Hand saw
- Level
Tip 1
Before you begin, it’s important to carefully measure the area where the panelling will be installed. In this tutorial, I’ll be creating four panels, and there are plenty of online measuring tools and calculators available to help make the planning process quick and easy.
Step 1
The first step is to create the frame, starting at the bottom where it meets the skirting board. The panels I’m using are 1.2 metres long, so you’ll most likely need to cut some of them down to size to ensure they fit properly.
To cut the panels, use a hand saw and work slowly with a steady rhythm to achieve a clean, accurate cut.
Tip 2
Once you have the bottom section of the panelling in place, it’s very important to check that it is level, as this will determine the overall finish and appearance of the wall. Getting this right from the start will make the rest of the job much easier. Continuously checking the level throughout the installation is key to achieving a professional-looking result.
Step 2
You can now begin fixing the wall panels to the wall. For this, I’m using No More Nails adhesive, which provides a strong bond while still allowing you to adjust the panels slightly if needed during positioning.
Once the bottom panels are secured, start at the corners of the wall and glue in the two outer panels first. Then position and fix the three central panels, making sure they are evenly spaced so you achieve four equal sections. Finally, attach the top section of the panelling, completing the layout and giving you a balanced set of four panels.
Tip 3
Before applying any adhesive, always dry-fit the panelling against the wall in its intended position. If needed, lightly mark pencil guidelines so you know exactly where each section should be fixed. This helps ensure accurate placement and a much cleaner, more professional finish once the panels are glued in place.
Step 3
As you can see from the previous image, you now have four perfectly even panels. The next step is to prepare them for painting.
If you’ve been checking the levels as you install the panelling, you should only have very fine gaps where the sections join. To prepare these for painting, fill the joins with decorators’ caulk and lightly sand once dry. This will create a smooth, seamless finish once the paint is applied.
Step 4
We’re now ready to paint the wall panelling. I’ll be using Lick PRO White Satinwood, applying it with a combination of a mini roller and a paintbrush for a smooth, even finish.
Always start by cutting in the edges of each panel with a brush first, then use a mini roller to achieve a smooth, even finish across the larger areas.
1st Coat
2nd coat
The panelling will require two coats of paint, and it’s important to allow the manufacturer’s recommended drying time between each coat. For Lick PRO Satinwood, this is typically around two hours between the first and second coats.
And that’s the end of the tutorial on creating wall panelling for a bedroom. It’s a simple way to add character, showcase your personal style, and give your space a touch of class and sophistication.
Post by DIYDADDY – Nigel Higgins
